Description
HYDRO EPOXY PRIMER – epoxy primer, an excellent waterproofing solution for floors, walls, furniture in wet rooms, showers, indoors, outdoors and all areas requiring waterproofing. Highly recommended during microcement installations on a substrate with moisture issues and outdoor areas.
PRODUCT CHARACTERISTIC / USES
- Priming concrete substrates, cementitious layers, and epoxy mortars.
- Waterproofing solution for floors, walls, furniture in wet rooms, showers, indoors, outdoors and all areas requiring waterproofing
- Suitable for low to medium absorption surfaces.
- Priming agent for ClaudiCemento systems. Recommended as part of substrate preparation in all outdoor microcement installations, prior to for shower try and basins microcement coating.
- Acts as a binder for levelling and base coats.
PACKAGING
Component “A” – 5 L .
Component “B” – 2.5 L
CONSUMPTION & COVARAGE
Consumption 7.5 L (Component A+ Component B ) – 250-300 g/sqm – depending on thickness applied. 1mm thickness is recommended.
Coverage 7.5 L (Component A+ Component B ) – 37 – 25 sqm per one coat, 18 – 12.5 sqm per two coats.
APPLICATION
Substrate Preparation:
HYDRO EPOXY PRIMER offers excellent adhesion without the necessity for mechanical preparation. Should preparation be required, techniques such as milling, shot blasting, or sanding should be employed, dependent on the specific substrate and subsequent treatments.
Mixing Instructions:
HYDRO EPOXY PRIMER is supplied in pre-measured containers to ensure accurate mixing of the two components. Partial mixing is not recommended. Add Component B to Component A and mix thoroughly using a drill equipped with a stirrer at 300-350 RPM for 3-5 minutes, until a uniform consistency is achieved.
Application Method:
- Apply using a brush or roller without dilution.
- Apply one layer, 1 mm thickness is recommended
- Allow to dry for 24hrs
- Once the Hydro Epoxy Primer is dry No1 Quartz sealer should be used prior to the microcement installation to ensure appropriate adhesion
- Avoid the formation of puddles during application.
- Clean tools with solvent immediately after use.
STORAGE CONDITIONS
- Store in environments free from frost and heat, not exceeding 35°C.
- Shelf life is one year when stored in original, unopened containers in covered areas.
TECHNICAL SHEET
Click here to download the pdf file
